Mock Test 9
Quiz Summary
0 of 40 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
Information
|
You must fill out this field.
|
General instruction:
- General Instructions: The clock for the total duration of the mock test will be set at the server . The countdown timer in the top right corner of screen will display the remaining time available for you to complete the examination. When the timer reaches zero, the examination will end by itself. You will not be required to end or submit your examination.
- The Question Palette displayed on the right side of screen will show the status of each question using one of the following symbols.
You have not answered the question.
You have NOT answered the question, but have marked the question for review.
You have answered the question.
- The Mark for Review status for a question simply indicates that you would like to look at that question again. If a question is answered, but marked for review, then the answer will be considered for evaluation unless the status is modified by the candidates.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 40 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 marks, (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- Answered
- Review
- Not Answered
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
-
Question 1 of 40
1. Question
1. When installing a new indirect cold water system, which of the following should happen, according to the Water Regulations?
CorrectIncorrect -
Question 2 of 40
2. Question
2. Pin holing in copper pipework is commonly caused by:
CorrectIncorrect -
Question 3 of 40
3. Question
3. One of the major problems when leaving a dead leg in a cold water pipe is:
CorrectIncorrect -
Question 4 of 40
4. Question
4. On the completion of a new cold water installation, the system has been proven sound. What would the next course of action be?
CorrectIncorrect -
Question 5 of 40
5. Question
5. When decommissioning a system, the correct procedure is to:
CorrectIncorrect -
Question 6 of 40
6. Question
6. Which of the following materials is not allowed to be installed on new cold water systems?
CorrectIncorrect -
Question 7 of 40
7. Question
7. What type of valve is designed to shut off the supply of water in a cistern at a predetermined level?
CorrectIncorrect -
Question 8 of 40
8. Question
8. The correct back flow protection device that would be installed prior to a shower mixer valve would be:
CorrectIncorrect -
Question 9 of 40
9. Question
9. What is likely to occur if a tap spout is below the spillover level of the basin?
CorrectIncorrect -
Question 10 of 40
10. Question
10. Which British Standard offers guidance on the capacity of cold water storage cisterns?
CorrectIncorrect -
Question 11 of 40
11. Question
11. What category of water presents a severe health risk?
CorrectIncorrect -
Question 12 of 40
12. Question
12. What mechanical backflow protection would be used to protect against Category 3 water?
CorrectIncorrect -
Question 13 of 40
13. Question
13. According to the Water Supply (Water Fittings) Regulations what must be installed prior to every float operated valve?
CorrectIncorrect -
Question 14 of 40
14. Question
14. What type of system can a full way gate valve be installed in?
CorrectIncorrect -
Question 15 of 40
15. Question
15. What is the correct depth that the incoming cold water mains must be laid between?
CorrectIncorrect -
Question 16 of 40
16. Question
16. The working pressure on a system is 2 bar. The pipework has all been installed in copper. What pressure does the system need to be pressurised to for a soundness test?
CorrectIncorrect -
Question 17 of 40
17. Question
17. When commissioning a new cold water system in a customer’s property, the system will need to have the pressure tested, the flow rate recorded and water levels set. Which of the following should also take place as part of the commissioning process?
CorrectIncorrect -
Question 18 of 40
18. Question
18. Which statement relates to fluid category 5 under the Water Supply Regulations ?
CorrectIncorrect -
Question 19 of 40
19. Question
19. When installing a new indirect cold water system, which of the following should happen, according to the Water Regulations?
CorrectIncorrect -
Question 20 of 40
20. Question
20. During the erection of a dwelling information on the required location for a cold water storage cistern can be found in the :
CorrectIncorrect -
Question 21 of 40
21. Question
21. One of the major problems when leaving a dead leg in a cold water pipe is:
CorrectIncorrect -
Question 22 of 40
22. Question
22. It has been identified that the water supply to a property cannot provide sufficient water flow for a new shower installation to work correctly. What is the correct course of action the apprentice plumber should take?
CorrectIncorrect -
Question 23 of 40
23. Question
23. When decommissioning a system, the correct procedure is to:
CorrectIncorrect -
Question 24 of 40
24. Question
24. What type of valve is designed to shut off the supply of water in a cistern at a predetermined level?
CorrectIncorrect -
Question 25 of 40
25. Question
25. The correct back flow protection device that would be installed prior to a shower mixer valve would be:
CorrectIncorrect -
Question 26 of 40
26. Question
26. At what point does the incoming water supply become the costumers responsibility ?
CorrectIncorrect -
Question 27 of 40
27. Question
27. With reference to the siting of cold water storage cisterns, it is a requirement that :
CorrectIncorrect -
Question 28 of 40
28. Question
28. When the incoming supply enters a dwelling through a duct in a solid floor and the distance is more than 750mm from the outside wall what must you also do ?
CorrectIncorrect -
Question 29 of 40
29. Question
29. What would be the thickness of flexible foam or expanding plastic insulation on a 15mm pipe found inside?
CorrectIncorrect -
Question 30 of 40
30. Question
30. Which statement relates to Water Distribution Network ?
CorrectIncorrect -
Question 31 of 40
31. Question
31. What should the incoming service pipe be made of ?
CorrectIncorrect -
Question 32 of 40
32. Question
32. What is done to the incoming service pipe to allow for expansion ?
CorrectIncorrect -
Question 33 of 40
33. Question
33. What is the first valve after the mains connection on a cold water supply system to a domestic property?
CorrectIncorrect -
Question 34 of 40
34. Question
34. What is the correction tool for cutting holes in a plastic cold water storage cistern?
CorrectIncorrect -
Question 35 of 40
35. Question
35. With reference to cold water storage cisterns, a common warning and overflow pipe should be used with cisterns of less than :
CorrectIncorrect -
Question 36 of 40
36. Question
36. Which one of the following should be positioned immediately above the cold water supply stop valve near the point of entry to a building?
CorrectIncorrect -
Question 37 of 40
37. Question
37. Which one of the following methods of jointing copper tube should not be used for underground service pipe connections?
CorrectIncorrect -
Question 38 of 40
38. Question
38. The correct back flow protection device that would be installed prior to a shower mixer valve would be:
CorrectIncorrect -
Question 39 of 40
39. Question
39. When cold feed and cold distributing pipes are connected to the same cold water storage cistern, the :
CorrectIncorrect -
Question 40 of 40
40. Question
40. Which one of the following pipes should be connected to a cold water storage cistern by means of a filtered connection?
CorrectIncorrect