Mock Test 10
Quiz Summary
0 of 40 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
Information
|
You must fill out this field.
|
General instruction:
- General Instructions: The clock for the total duration of the mock test will be set at the server . The countdown timer in the top right corner of screen will display the remaining time available for you to complete the examination. When the timer reaches zero, the examination will end by itself. You will not be required to end or submit your examination.
- The Question Palette displayed on the right side of screen will show the status of each question using one of the following symbols.
You have not answered the question.
You have NOT answered the question, but have marked the question for review.
You have answered the question.
- The Mark for Review status for a question simply indicates that you would like to look at that question again. If a question is answered, but marked for review, then the answer will be considered for evaluation unless the status is modified by the candidates.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 40 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 marks, (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- Answered
- Review
- Not Answered
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
-
Question 1 of 40
1. Question
1. According to BS6700 and the Water Regulations, a drain off valve should be installed:
CorrectIncorrect -
Question 2 of 40
2. Question
2. While installing pipework in a property, you are called off site to another job. What would be the correct course of action with any open-ended pipework?
CorrectIncorrect -
Question 3 of 40
3. Question
3. The use of WRAS approved fittings when installing cold water pipework is:
CorrectIncorrect -
Question 4 of 40
4. Question
4. What is the most cost effective way to repair a stop valve that has the head gear jammed open?
CorrectIncorrect -
Question 5 of 40
5. Question
5. When installing a new water service pipe to a property, it should
normally be buried between what depths?CorrectIncorrect -
Question 6 of 40
6. Question
6. The fluid category that offers a slight health risk to a customer is:
CorrectIncorrect -
Question 7 of 40
7. Question
7. To protect category 1 water from category 3 water, what would need to be installed, according to the Water Regulations?
CorrectIncorrect -
Question 8 of 40
8. Question
8. If a customer’s tap is dripping, what tool can be used to correct the situation?
CorrectIncorrect -
Question 9 of 40
9. Question
9. What are the two MAIN considerations for the incoming mains cold water supply?
CorrectIncorrect -
Question 10 of 40
10. Question
10. What category of water is wholesome, potable drinking water?
CorrectIncorrect -
Question 11 of 40
11. Question
11. What is the name of the cold water main pipe that connects the mains supply in the road up to the boundary meter?
CorrectIncorrect -
Question 12 of 40
12. Question
12. Which one of the following is not a factor in the Water Supply (Water Fittings) Regulations?
CorrectIncorrect -
Question 13 of 40
13. Question
13. You are testing a customer’s cold water system and you trace the pipework back which is connected to the incoming main. What type of system is this?
CorrectIncorrect -
Question 14 of 40
14. Question
14. Why can you not install a BS 1212 Part 1 float operated valve in a domestic cistern?
CorrectIncorrect -
Question 15 of 40
15. Question
15. Where would you install a stop valve in a property?
CorrectIncorrect -
Question 16 of 40
16. Question
16. What is the only true way to remove the hardness from the water within a property?
CorrectIncorrect -
Question 17 of 40
17. Question
17. Which design of tap will need protection against Category 2 water contaminating Category 1 water?
CorrectIncorrect -
Question 18 of 40
18. Question
18. According to BS6700 and the Water Regulations, a drain off valve should be installed:
CorrectIncorrect -
Question 19 of 40
19. Question
19. Which one of the following must not be used when making connections between systems pipework and cold water storage cisterns?
CorrectIncorrect -
Question 20 of 40
20. Question
20. The water regulations for hydraulic soundness tests on rigged cold water supply and distributing pipes require that the test :
CorrectIncorrect -
Question 21 of 40
21. Question
21. Which one of the following shows the type of soundness test required by the water regulations for cold water systems?
CorrectIncorrect -
Question 22 of 40
22. Question
22. What material is a part 3 float operated valve made of ?
CorrectIncorrect -
Question 23 of 40
23. Question
23. What is another name for a part 1 FOV ?
CorrectIncorrect -
Question 24 of 40
24. Question
24. Which statement relates to Bore Holes ?
CorrectIncorrect -
Question 25 of 40
25. Question
25. Which of the following sources of water would considered as Dangerous ?
CorrectIncorrect -
Question 26 of 40
26. Question
26. Major refurbishment is being carried out on a large occupied dwelling. Which one of the following should be advised before the cold water supply to the dwelling is taken out of service?
CorrectIncorrect -
Question 27 of 40
27. Question
27. What Fitting is used to connect the water mains to the communication pipe ?
CorrectIncorrect -
Question 28 of 40
28. Question
28. What would be the thickness of flexible foam or expanding plastic insulation on a 15mm pipe found outside?
CorrectIncorrect -
Question 29 of 40
29. Question
29. What must be done with the incoming supply when it enters the building and passes through a suspended floor area ?
CorrectIncorrect -
Question 30 of 40
30. Question
30. What would be the thickness of loose fill insulation on a 22mm pipe found inside?
CorrectIncorrect -
Question 31 of 40
31. Question
31. Which statement relates to fluid category 3 under the water supply regulations ?
CorrectIncorrect -
Question 32 of 40
32. Question
32. Which one of the following must be carried out prior to commencing work on moving an instantaneous electric water heater from over a sink to a new position?
CorrectIncorrect -
Question 33 of 40
33. Question
33. What would be the thickness of flexible foam or expanding plastic insulation on a 15mm pipe found outside?
CorrectIncorrect -
Question 34 of 40
34. Question
34. What Fitting is used to connect the water mains to the communication pipe ?
CorrectIncorrect -
Question 35 of 40
35. Question
35. What devise would be fitted to protect category 1 water from category 2 ?
CorrectIncorrect -
Question 36 of 40
36. Question
36. Which statement refers to Backflow ?
CorrectIncorrect -
Question 37 of 40
37. Question
37. In relation to the hot water draw off from a cold water storage cistern where must the cold water draw off be ?
CorrectIncorrect -
Question 38 of 40
38. Question
38. The minimum diameter of an incoming cold water rising main in a dwelling is :
CorrectIncorrect -
Question 39 of 40
39. Question
39. To check if the incoming water service to an older property provides sufficient supply to meet a new plumbing installation with additional kitchen and bathroom appliances, the plumber would use :
CorrectIncorrect -
Question 40 of 40
40. Question
40. Which one of the following is not approved for use in cold water systems installation?
CorrectIncorrect